The Slugger JHM 4 x 4 is a powerhouse drilling system capable of mag base drilling up to 4 inch (100 mm) ? holes, 3 inches (75 mm) deep. - 4 speed gear box for powering through large and small holes.
- Versatile, MT 3 capable, uses 3⁄4" shank cutters.
- Smart MagnetTM circuitry for safe drilling on marginal surfaces.
- Chip guard
- Gravity-fed, external coolant
- Easy to use control panel
- Concealed motor wiring
- Center pin coolant feed
- Dovetail feed guides
- Part # 31342621206
| Specifications | | Arbor bore | 3/4" | | Cutter diameter (maximum) | 4" | | Drill point breakaway | 1934lbs. on 1" plate | | Height | 31-1/2" | | Length | 16" | | Magnet base dimensions | 4-3/4" x 9-1/2" | | Magnet dead lift | 4833lbs. On 1" plate | | Motor | 1.8 HP 1400W (single phase) 120V / 11.7A ~ 240V / 5.8A 100-150/200-310 RPM (no load) | | Slugger depth of cut (maximum) | 3" | | Spindle bore | #3 morse taper | | Weight | 73lbs. | | Width | 9-1/2" |
|
